德国进口滑片泵 进口油泵厂家 进口滑片泵价格

德国进口滑片泵 进口油泵厂家 进口滑片泵价格

Vane pump

德国KAYSEN凯森进口滑片泵概述
滑片泵主要由转子、定子(即泵体)、滑片及两侧盖板所组成。依靠偏心转子旋转时泵缸与转子上相邻两叶片间所形成的工作容积的变化来输送液体或使之增压的回转泵(见泵)。
转子是具有径向槽的圆柱体，槽内安放滑片，滑片可以在槽内自由滑动。转子偏心地安放在泵体内，当转子由原动机带动旋转时，滑片依靠离心力或弹簧力紧压在泵体的内壁上。在转子前半转，相邻两叶片所包围的空间逐渐增大形成局部真空而吸入液体。而后半转，此空间逐渐减小，挤压液体，将液体压送到排出管中。根据滑片的安装位置分有内装滑片泵(滑片装在转子上)和外装滑片泵(滑片装在泵体上)。一般这类泵工作压力在7MPa以下。


主要特点：
●可靠的密封性
针对粘性、高温介质的特点，采用特殊结构的机械密封，具有安全、耐用、可靠特点。
●维修简单、方便
打开泵盖，提出旧滑片，插入新滑片。只需几分钟，您的泵就可以重新投入工作。日常检查同样容易。
●安全灵敏的压力保证
泵中设置安全溢流阀，在出口系统突然关闭时，出口压力上升量不超过0.15Mpa，这一方面保证泵和系统的安全，另一方
面，保证电机不过载。
●较强的自吸能力
用于抽吸地下罐时，提升高度可达7.5m。
●高效率
泵内滑片受离心力、机械推力、液压力的联合作用，紧贴定子内曲线运动，从而使泵具有*的高效率。
●保持性能不变的自调滑片
滑片从转子槽中滑出，不断补充磨损，而不降低泵的性能。这与齿轮泵有本质的区别。
●输送剪力敏感性液体的能力
液力滑片高效能的设计使泵在驱动时减少了滑片对流体的剪力及搅动，避免了因此而产生的流体性质的改变。

主要优点：
●结构较紧凑
●外形尺寸不大
●流量较均匀
●运转平稳
●脉动和噪声小
●效率比一般齿轮泵高

主要应用：
滑片泵主要用于机床、油压机、起重运输机械、工程机械和塑料注塑机等的液压系统和润滑系统。

德国进口滑片泵 进口油泵厂家 进口滑片泵价格

Germany KAYSEN Import Vane Pump Overview
Vane pump mainly by the rotor, the stator (ie, pump), vane and both sides of the cover plate. A pump (see pump) is conveyed by means of a change in the working volume formed between the pump cylinder and the adjacent two blades on the rotor when the eccentric rotor rotates.
The rotor is a cylinder with a radial groove in which the vane is fitted and the vane can slide freely in the slot. The rotor is eccentrically mounted in the pump body, and when the rotor is driven by the prime mover, the vane is pressed against the inner wall of the pump body by centrifugal force or spring force. In the rotor half a turn, the adjacent two leaves surrounded by the space gradually increased the formation of local vacuum and inhalation of liquid. And then half turn, this space is gradually reduced, squeezing the liquid, the liquid pressure to the discharge tube. According to the installation location of the vane is equipped with a built-in vane pump (skate mounted on the rotor) and the outer vane pump (slide on the pump body). Generally this type of pump working pressure below 7MPa.

main feature:
● Reliable sealing
For the characteristics of viscous, high temperature media, the use of special mechanical seal structure, with a safe, durable and reliable features.
● simple and convenient maintenance
Open the pump cover, lift the old slide, insert the new slide. In just a few minutes, your pump can be put back into work. Daily check is also easy.
● Safe and sensitive pressure guarantee
The pump set the safety relief valve, the exit system suddenly closed, the outlet pressure rise does not exceed 0.15Mpa, this area to ensure the safety of the pump and the system, the other side
Face, to ensure that the motor is not overloaded.
● Strong self-priming ability
For suction underground tank, the lifting height of up to 7.5m.
● High efficiency
Pump vane by the centrifugal force, mechanical thrust, hydraulic pressure combined action, close to the stator curve movement, so that the pump has a unique high efficiency.
● Keep the self-adjusting vane with the same performance
The slider slides out of the rotor slot and continues to compensate for wear without degrading pump performance. This is essentially different from the gear pump.
The ability to transport shear sensitive liquids
The high-performance design of the hydraulic vane allows the pump to reduce the shearing force and agitation of the vane to the fluid during driving, thus avoiding the consequent changes in the fluid properties.

Key Benefits:
● The structure is more compact
● Dimensions are not large
● Traffic is more uniform
● smooth operation
● pulsation and noise is small
The efficiency is higher than the average gear pump

main application:
Vane pump is mainly used for machine tools, hydraulic presses, lifting transport machinery, engineering machinery and plastic injection molding machines and other hydraulic systems and lubrication systems.

德国KAYSEN凯森对您的承诺：

●放心的质量：从铸件到产品，实行全过程质量监控，*检测，责任到人！

●贴心的价格：高效成本控制，自产自销，减少中间环节，让利于客户！

●快速的货期：充足的库存，上海便捷物流，缩短交货期，严格按照合同期交货！

Germany Kaysen commitment to you:

● Reliable quality: from casting to the product, the implementation of the whole process of quality control, all-round detection, responsibility to the people!

● intimate price: efficient cost control, production for sale, to reduce the intermediate links, to help customers!

● fast delivery: adequate inventory, Shanghai convenient logistics, shorten the delivery time, in strict accordance with the contract delivery!