不锈钢贮罐、配制罐

概述 Descriptions

该系列容器适用于制药行业的浓/稀配之用，罐体设有夹层，可加热、冷却、内表面采用电解镜面抛光，封头(锥形)均经旋压加工、符合GMP标准，搅拌装置采用卫生级机械密封，容器保，温采用聚氨酷或珍珠棉，接口采用国际标准快装卡箍式，方便卫生，渡边经旋压加工，外表面采用抛光、喷砂、磨砂或冷轧原色哑光等多种形式，使容器在任何场地都能显示它的品质。设备配备空气呼吸孔，CIP清洗喷光、视镜法兰快开式人孔等装置。

This series of containers are suitable for thick/thin mixing in the pharmaceutical industry The tank body is provided with an interlayerwhich can be heated. cooled, and the inner surface is polished by electrolvtic mirror surface. The head (cone) is spun to conform toGMP standard. The stiring device adopts sanitary mechanica seal, and the container is kept warm by polyurethane or pear cotonThe interface adopts international standard quick-fitting clamp type, which is convenient and sanitary. The watanabe is spun, and theouter surtace adopts polishing, sandlasting, trosting or col-roling primary color mate and other torms, so that the container candisplay its excellent quality in any site. The equipment is equipped with air breathing holes, ClP cleaning and light spraying, mirrorflange quick opening manhole and other devices.

根据贮存能力不同由1000-15000L，贮罐能力在20000以上的购罐，建议使用室外贮罐，贮罐使用SUS304不锈钢制成，根据罐类设计要求可附带装置如下:搅拌器/进、出料口/人孔/温度计/液位指示器/高、低液位报警孔/防蝇、防尘呼吸气孔/计量器

According to different storagecapacities，outdoor storagetanks are recommended forstorage tanks with a storagecapacity of 1,000-15,000 L andabove 20,000 LThe storagetanks are made of SUS304stainless steel.According totank design requirements， thefollowing devices can beattached:Agitator/inlet/outlet/manhole/thermometer/liquid levelindicator/high/low liquid levelalarm hole/fly-proof，dust-proofbreathing air hole/meter