APAX-5018
12通道热电偶输入模块
更多图片
- 通道与底板之间的隔离保护
- 断线检测功能(4 ~ 20 mA 和热电偶)
- 电压/电流范围: ±50 mV, ±100 mV, ±500 mV, ±1 V, ±2.5 V, ±20 mA, 0 ~ 20 mA, 4 ~ 20 mA
- 输入通道可配置不同的输入类型和范围
- 高密度12路模拟量输入,记录热电偶传感数据
规格
General Certifications CE, FCC class A Dimensions (W x H x D) 30 x 139 x 100 mm Enclosure ABS+PC Weight 170 g Power Consumption 4 W @ 24 VDC (APAX-5017) (typical) 3.5 W @ 24 VDC (APAX-5018) Analog Input Channels 12 (Differential) Input Type V, mV, mA (APAX-5017) V, mV, mA, Thermocouple (APAX-5018) Input Impedance Voltage: >10 MW (APAX-5017), >1 MW (APAX-5018) Current: 120W (Current) Voltage/Current Range ±150 mV, ±500 mV, ±1 V, ±5 V, ±10 V, ±20 mA, 0 ~ 20 mA, 4 ~ 20 mA (APAX-5017) ±50 mV, ±100 mV, ±500 mV, ±1 V, ±2.5 V, ±20 mA, 0 ~ 20 mA, 4 ~ 20 mA (APAX-5018) Temperature Range Type J (-210 ~ 1200° C), Type K (-270 ~ 1372° C), (APAX-5018 only) Type T (-270 ~ 400° C), Type E (-270 ~ 1000° C), Type R (0 ~ 1768° C), Type S (0 ~ 1768° C), Type B (300 ~ 1820° C) Configure Different Range for Each Channel Resolution 16-bit with accuracy ±0.1% or better of Full Scale Range (Voltage), ±0.2% or better of Full Scale Range(Current) Note: Refer to manual for Thermocouple accuracy Sampling Rate 12 samples/second (total) Noise Rejection Hardware Filter (50/60 Hz) Wire Burn-out Detection APAX-5017: Yes (4 ~ 20 mA only) APAX-5018: Yes (4 ~ 20 mA and Thermocouple) Common Mode Voltage 200 VDC Protection 2,500 VDC Isolation Between Channels and Backplane Over Voltage Protection Environment Operating Temperature -10 ~ 60° C (when mounted vertically) Storage Temperature -40 ~ 70° C Relative Humidity 5 ~ 95% (non-condensing)