直流电压输入2000A的电流传感器
● 用于无温度变化的场所的短时间测量
● 通过显示器单元在现场确认测量值
● 根据用途可向存储记录仪、数据采集仪进行4种输出(与显示器单元一起使用) 波形输出、有效值输出、峰值输出、频率输出
基本参数
额定测量电流 | AC/DC 2000 A |
---|---|
输入电流 | 2000 A (有频率降额) |
峰值 | 2840 A peak |
频率带宽 | DC~5 kHz (-3dB) |
相位代表精度 | ±2.3 deg. (DC < f ≤ 66 Hz) |
输出率 | 0.1 mV/A |
对地额定电压 | AC/DC 600 V (CAT IV) AC/DC 1000 V (CAT III) |
可测量导体直径 | φ 55 mm以下 |
输出连接器 | PL14 |
体积及重量 | 64W × 195H × 34D mm, 510 g, 线长2.5 m |
附件 | 无 |
DC voltage input 2000A current sensor
● Short-term measurement for locations without temperature changes
● Confirm the measured value on site through the display unit
● 4 outputs (for use with the display unit) to the storage recorder and data acquisition device according to the application. Waveform output, RMS output, peak output, frequency output